Search
Search U.S. government technical reports digitized or harvested by TRAIL.
Keyword Search
72 results returnedSearch results
- Measurement of pressures on rock pillars in underground mines.
- Measurement of pressures on rock pillars in underground mines.
- The microseismic method of predicting rock failure in underground mining.
- The microseismic method of predicting rock failure in underground mining.
- Standardized tests for determining the physical properties of mine rock
- A gage and recording equipment for measuring dynamic strain in rock
- Generation and propagation of strain waves in rock :part I
- A study of the air and rock vibrations produced by impact testing of mine roof
- Rock breakage by explosives
- Biaxial device for determining the modulus of elasticity of stress-relief cores
- Effects of stress relief and other changes in stress on the physical properties of rock
- A method of determining dynamic tensile strength of rock at minimum loading
- Changes in stress concentration created by undercutting in block caving
- Effect of decoupling on explosion-generated strain pulses in rock
- Creep in model pillars
- Piezoelectric pulsing equipment for sonic velocity measurements in rock samples from laboratory size to mine pillars
- Inelastic deformation of rock under a hemispherical drill bit
- Presplitting rock in the presence of a static stress field
- Analysis of stresses in a rock disk subjected to peripheral thermal shock
- Deep mine stress determinations using flatjack and borehole deformation methods
- Piezoelectric pulsing equipment for shear wave velocity measurements in rock samples
- An ultrasonic method for determining the elastic symmetry of materials
- Suggested orientation conventions for elastically anisotropic polycrystalline and amorphous materials
- An ultrasonic method for determining the attenuation symmetry of materials
- Near-surface horizontal stresses including the effects of rock anisotropy
- Rock noise source location techniques
- A method for estimating strength of rock containing planes of weakness
- A least squares method for improving the source location of rock noise
- Determination of attitudes of joints surveyed with a borescope in inclined boreholes
- Rock damage from small charge blasting in granite
- Strengthening of fractured rock pillars by the use of small radial reinforcement pressures
- Effects of specimen radius on the stress state near a roof bolt anchor :a finite element determination
- Bureau of Mines test procedures for rocks,
- A new method of analysis to obtain exact solutions for stresses and strains in circular inclusions
- In situ determination of rock behavior by overcore stress relief method, physical property measurements, and initial deformation method
- A standard rock suite for rapid excavation research
- NX borehole jack modulus determinations in homogeneous, isotropic, elastic materials
- Chemical analysis of slickensides from coal mine roof shale
- Structural analysis of a coal mine opening in elastic, multilayered material
- Tilt precursors in rock before failure :a laboratory investigation
- Thermomechanical method for secondary breakage of hard rocks
- Field measurements and corresponding finite-element analysis of closure during shaft sinking at the Lucky Friday mine
- Submersion testing of coatings for sealing shale
- Iterative approximation techniques for microseismic source location
- Effects of time between exposure and support on mine roof stability, Bear Coal Mine, Somerset, Colo.
- Pillar failure analysis and in situ stress determinations at the Fletcher mine near Bunker, Mo.
- Mechanical properties of cores obtained from the unleached saline zone, Piceance Creek Basin, Rio Blanco County, Colo.
- Geology of the single-entry project at Sunnyside Coal Mines 1 and 2, Sunnyside, Utah
- Flexible, fiberoptic stratascope for mining applications
- Stress-induced failures in mine roof