Search
Search U.S. government technical reports digitized or harvested by TRAIL.
Keyword Search
14045 results returnedSearch results
- The Chemical Action of Oils on Single Crystals of Metals
- Tests on Thin-Walled Celluloid Cylinders to Determine the Interaction Curves Under Combined Bending, Torsion, and Compression or Tension Loads
- Graphical and Analytical Methods for the Determination of a Flow of a Compressible Fluid Around an Obstacle
- Effect of Propeller-Axis Angle of Attack on Thrust Distribution Over the Propeller Disk in Relation to Wake-Survey Measurement of Thrust
- Studies of Blade Shank and Pitch Distribution for Constant-Speed Propellers
- Survey of Adhesives and Adhesion
- Effect of Fatigue-Stressing Short of Failure on Some Typical Aircraft Metals
- Axial Fatigue Test at Two Stress Amplitudes of 0.032-Inch 24S-T Sheet Specimens With a Circular Hole
- Flight Tests of Dive-Recovery Flaps on an XP-51 Airplane
- Nitrous Oxide Supercharging of an Aircraft-Engine Cylinder
- Piston-Ring Vibration and Breakage
- A Preignition Indicator for Aircraft Engines
- On the Shear Strength of Skin-Stiffener Panels With Inspection Cut-Outs
- Operating Stresses in Aircraft-Engine Crankshafts and Connecting Rods 1: Slip-Ring and Bush Combinations for Dynamic-Strain Measurements
- Flight and Test-Stand Investigation of High-Performance Fuels in Modified Double-Row Radial Air-Cooled Engines 1: Determination of the Cooling Characteristics of the Flight Engine
- Flight and Test-Stand Investigation of High-Performance Fuels in Modified Double-Row Radial Air-Cooled Engines 2: Flight Knock Data and Comparison of Fuel Knock Limits With Engine Cooling Limits in Flight
- Tensile-Strength Investigation of Cast-Iron Piston Rings of Various Strengths
- Tank Tests of a Flying-Boat Model Equipped With Several Types of Fairing Designed to Reduce the Air Drag of the Main Step
- Tank Tests of a Powered Dynamic Model of a Flying Boat Having an Afterbody Length-Beam Ratio of 4.7-Langley Tank Model 203C-1
- Spray Characteristics and Take-Off and Landing Stability of Several Modifications of a 1/8-Size Model of the PBN-1 Flying Boat - NACA Model 192
- Stability and Control Characteristics of a Fighter Airplane in Inverted Flight Attitude as Determined by Model Tests
- Shear-Lag Tests of a Box Beam With a Highly Cambered Cover in Tension
- Performance Selection Charts for Gliders and Twin-Engine Tow Planes
- Reduction of Fuel-Vapor Loss by Omitting Some of the Fuel Constituents Normally Lost During Flight
- Tunnel-Wall Corrections to Rolling and Yawing Moments Due to Aileron Deflection in Closed Rectangular Wind Tunnels
- The Two-Dimensional Incompressible Potential Flow Over Corrugated and Distorted Infinite Surfaces
- Ultraviolet Absorption Spectra of Aromatic Amines in Isooctane and in Water
- Two-Dimensional Wind-Tunnel Investigation of Spoiler Aileron Flap Model for the Hughes XF-11 Airplane
- Two-Dimensional Wind-Tunnel Investigation of Six Airfoil Sections for the Wing of the Vega XP2V-1 Airplane
- Radial Aircraft-Engine Bearing Loads 1: Crankpin-Bearing Loads for Engines Having Nine Cylinders Per Crankpin
- Recent Development of the Two-Stroke Engine 2 - Design Features
- Relation Between Fuel Economy and Crank Angle for the Maximum Rate of Pressure Rise
- Response of Helicopter Rotors to Periodic Forces
- Resistance Tests of Models of Three Flying-Boat Hulls With a Length-Beam Ratio of 10.5
- The Resistance of Three Series of Flying Boat-Hulls as Affected by Length-Beam Ratio
- Static-Thrust Tests of Six Rotor-Blade Designs on a Helicopter in the Langley Full-Scale Tunnel
- Strain Measurements and Strength Tests on the Tension Side of a Box Beam With Flat Cover
- Stresses Near the Juncture of a Closed and an Open Torsion Box as Influenced by Bulkhead Flexibility
- Study of the Mixture Distribution of a Double-Row Radial Aircraft Engine
- Suitability of 18 Aromatic Amines for Overwater Storage When Blended With Aviation Gasoline
- Sea-Level Performance Tests of a 22-Inch-Diameter Pulse-Jet Engine at Various Simulated Ram Pressures
- The Rupture Test Characteristics of Six Precision-Cast and Three Wrought Alloys at 1700 Degrees and 1800 Degrees Fahrenheit
- Principles of Moment Distribution Applied to Stability of Structures Composed of Bars or Plates
- Process of Lead-Deposit Accumulations on Aircraft-Engine Spark Plugs
- Smoking Characteristics of Various Fuels as Determined by Open-Cup and Laboratory-Burner Smoke Tests
- Some Flight Measurements on Pressure Distribution During Tail Buffeting
- Spin-Tunnel Tests of Airplane Models With Extreme Variations in Mass Distribution Along the Three Body Axes
- Standard Method of Graphical Presentation of Centrifugal Compressor Performance
- Standard Procedures for Rating and Testing Centrifugal Compressors
- Theoretical and Experimental Dynamic Loads for a Prismatic Float Having an Angle of Dead Rise of 22-1/2 Degrees