Browse TRAIL Inventories

Profile-Drag Coefficients of Conventional and Low-Drag Airfoils as Obtained in Flight

A method for predicting the elevator deflection required to land

A method for studying the hunting oscillations of an airplane with a simple type of automatic control

Measurements of flying qualities of a Curtiss SB2C-1 airplane (number 00014)

A method for estimation of maximum stresses around a small rectangular cut-out in a sheet-stringer panel in shear

Preliminary tank tests of an outboard float having the form of a streamline body of revolution fitted with a hydrofoil

Wind-tunnel investigation of aileron effectiveness of 0.20-airfoil-chord plain ailerons of true airfoil contour on NACA 65(sub 2)-415, 65(sub 3)-418 and 65(sub 4)-421 airfoil sections

On the flow of a compressible fluid by the hodograph method 2: fundamental set of particular flow solutions of the Chaplygin differential equation

On the flow of a compressible fluid by the hodograph method 1: unification and extension of present-day results

Variation of peak pitching-moment coefficients for six airfoils as affected by compressibility

Notes on the propeller and slipstream in relation to stability

Wind-Tunnel Investigation of Control-Surface Characteristics: [Part] 18 - A Linked Overhang Aerodynamic Balance

Wind-tunnel investigation of control-surface characteristics 19: a double flap with an overhang and an internal aerodynamic balance

Wind-tunnel investigation of control-surface characteristics 17: beveled-trailing-edge flaps of 0.20, 0.30, and 0.40 airfoil chord on an NACA 0009 airfoil

Researches on the Piston Ring

Tensile Tests of Round-Head, Flat-Head, and Brazier-Head Rivets

Torsion Tests of Stiffened Circular Cylinders

Wind-Tunnel Calibration and Correction Procedures for Three-Dimensional Models

Fatigue strength and related characteristics of joints in 24S-T Alclad sheet

Data on Material Properties and Panel Compressive Strength of a Plastic-Bonded Material of Glass Cloth and Canvas

Axial Fatigue Tests at Zero Mean Stress of 24S-T Aluminum-Alloy Sheet With and Without a Circular Hole

The Inward Bulge Type Buckling of Monocoque Cylinders 2: Experimental Investigation of the Buckling in Combined Bending and Compression

Aerodynamic Tests of a Full-Scale TBF-1 Aileron Installation in the Langley 16-Foot High-Speed Tunnel

Design of power-plant installations pressure-loss characteristics of duct components

Wind-Tunnel Procedure for Determination of Critical Stability and Control Characteristics of Airplanes

Tests of a Thermal Ice-Prevention System for a Wing Leading-Edge Landing-Light Installation

Application of Spring Tabs to Elevator Controls

A Theoretical Investigation of Longitudinal Stability of Airplanes with Free Controls Including Effect of Friction in Control System

A method for studying the hunting oscillations of and airplane with a simple type of automatic control

NACA Investigation of a Jet-Propulsion System Applicable to Flight

On the plane potential flow past a symmetrical lattice of arbitrary airfoils

Analysis of Circular Shell-Supported Frames

Wind-tunnel tests of a blunt-nose aileron with beveled trailing edge on an NACA 66(215)-216 airfoil with several modification of aileron nose and adjacent airfoil contour

Flight Measurements of Lateral and Directional Stability and Control Characteristics of the Grumman F8F-1 Airplane

Experimental and Theoretical Investigations of Cavitation in Water

Flight investigation of boundary-layer and profile-drag characteristics of smooth wing sections of a P-47D airplane

Performance tests of wire strain gages 2: calibration factors in compression

Performance tests of wire strain gages 3: calibrations at high tensile strains

Nondestructive measurement of residual and enforced stresses by means of x-ray diffraction II : some applications to aircraft problems

Nondestructive measurement of residual and enforced stresses by means of x-ray diffraction I : correlated abstract of the literature

Bearing strengths of 75S-T aluminum-alloy sheet and extruded angle

Bearing strengths of 24S-T aluminum alloy plate

Analytical study of transmission of load from skin to stiffeners and rings of pressurized cabin structure

Properties of some expanded plastics and other low-density materials

Fatigue tests on 1/8-inch aluminum alloy rivets

NACA investigation of fuels corresponding to specification AN-F-58 : results of studies in single combustors of J-33, J-34, J-35, and NENE turbojet engines

An Experimental Investigation of NACA Submerged-Duct Entrances

Flight and test-stand investigation of high-performance fuels in double-row radial air-cooled engines III : comparison of cooling characteristics of flight and test-stand engines

Flight and Test-Stand Investigation of High-Performance Fuels in Modified Double-Row Radial Air-Cooled Engines III: Knock-Limited Performance of 33-R as Compared with a Triptane Blend and 28-R in Flight

Flight tests of a P-63-1 airplane with an electric torquemeter


Published Year

Subject

Author

‹‹ previous 1 2 ... 79 80 81 82 83 84 85 ... 280 281 next ››